High-quality lacquer on alkyd basis, reinforced with polyurethane, is designed to protect against moisture, household detergents and mechanical damage, as well as to give decorative shine to painted and unpainted wood products, ceramics, metal, etc. Varnish can be coated with surfaces, painted with an overwhelming majority of enamel and paints (in the same way H. Water-based). Lacquer is an indispensable assistant for design work. It is used for internal work.
Method of use

• In order to avoid traces of enamel, it is necessary to protect the surfaces without coloring.
• 
  For best results, enamel should be applied at an ambient temperature not lower than + 10 °c.
• 
  Before use, the cylinder is vigorously shaking for 2-3 minutes.
• 
  The varnish is applied to a clean, dry surface. Wooden surface, before applying the varnish, it is recommended to carefully grind.
• 
  The varnish is applied from a distance of 25-30 cm thin layers with intermediate drying for 10-15 minutes at temperature + 20 ° C until the full staining of the surface. Drying time "on casting" at a temperature of + 20 ° C-at least 40 minutes. Full drying time at + 20 ° C-at least 5 hours.
• 
  Attention! When finished to avoid clogging, the sprayer head is recommended to flip the cylinder upside down and spray until then, until the varnish stops.

• We, lakko paint factory, manufacturers from Russia, Kazan

  We are responsible for the quality of the goods produced,

  We have no language barrier, always responsible for quality and always in touch.